Home » Infographic: 5 Ways to Increase Capacity in a Crisis

Infographic: 5 Ways to Increase Capacity in a Crisis

Augury

Written by Augury

September 8th, 2020 0 Min read
5 Ways to Increase Capacity in a Crisis infographic

The Covid-19 pandemic has hit manufacturers hard. Many organizations have to respond to dramatic spikes in demand or switch production to in-demand products, all while operating with less than 50 percent of staff onsite. How can you do more with less? Here are five practical tips.

How to increase manufacturing capacity in a crisis

A Better Way of Working Starts Here

Augury in Action

Machine Health

Building an Asset Monitoring Strategy: Why Coverage vs. Criticality Matters

The Flaw in the Criticality-first Instinct It’s easy to see how this happens. Resources are limited, so you prioritize where the exposure seems highest. You focus on the assets that would shut down the whole facility if they failed, which makes intuitive sense. But here’s the flaw: your most critical assets are usually the ones…
3 Min read
Machine Health

Hazardous Zone Monitoring: How Always-On PdM Reaches Your Most Dangerous Assets

Why Hazardous Zones Become Monitoring Deserts In standard plant environments, deploying continuous vibration monitoring is relatively straightforward. You mount sensors, connect to a gateway, and start seeing data. In a hazardous zone, that same process runs into a wall of real constraints: The result: critical equipment in your highest-consequence areas gets checked manually, infrequently, and…
5 Min read
Machine Health

The Diagnostic Evolution: Why Single-Signal Monitoring Leaves You Guessing

There’s a moment every reliability engineer knows. The vibration alert fires. You pull the data, study the waveform, and then… you’re not sure. Is that a bearing defect developing, or just some resonance from the line? Is this a two-week problem or a two-day problem? Do you schedule a shutdown, or do you wait and…
9 Min read