Coverage Without Compromise
Continuous machine health monitoring at enterprise scale, with connected hardware, software, and expertise that turn machine data into action across every asset, from critical equipment to ultra-low-RPM machines.
Connection, coverage, insights. On your terms.
Every Augury sensor streams to one platform and uses AI-powered diagnostics, so you can prioritize and act across your entire operation.
Continuous condition data
Continuous triaxial vibration, temperature, and magnetic flux data so your team catches early-stage faults while there’s time to plan.
Unified monitoring across asset classes and sites
Standard, ultra-low-speed, and hazardous classified assets in one platform, with centralized alerting and CMMS/EAM integration across every site.
Insights that power action
Raw signals become prioritized actions that your team can trust.
The right coverage for every asset
Find sensors suited to each asset’s speed, operating environment, and hazardous area classification. Smart IoT automatically connects sensors to the strongest available signal for reliable coverage without adding work for your team.
Coverage for the assets that keep your plant running.
Built for the line: Motors, pumps, fans, compressors, and gearboxes across everyday production environments, including washdown and sanitation-heavy areas
Actionable health data on the equipment that runs production every day, so you can plan maintenance on your terms instead of relying on walk-arounds and routes.
- Edge AI at the sensor with dynamic sampling adjusts when machine conditions change, capturing the data that matters most when it matters
- Multiple measurements in one sensor. Triaxial vibration, temperature, and magnetic flux provide a fuller picture of machine behavior
- Built for tough environments. IP66/68/69 rated protection for wet environments (high-pressure washdown, submersion, steam cleaning, etc.)
- Consistent data quality: Hexalock™ mount keeps readings reliable install after install
- Long battery life: field-replaceable battery lasts 3 to 5 years
Cover more equipment with less installation work. Wireless sensors require no sensor cabling or conduit, and each Cassia X2000 gateway supports up to 64 sensors.
Pairs with: Critical or Balance of Plant, so you can match service level to each asset’s criticality across the plant.
Early alerts give your team time to act before your largest, slowest, high-value machines stop production.
Built for: Large gearboxes, rotary drums, kilns, and other slow-rotating critical equipment running as low as 1 RPM.
Trend data on machines that have traditionally relied on periodic route-based checks, so your team can see developing issues early and plan interventions around production schedules.
- Ultrasonic sensing up to 100 kHz extends recordings and sampling to isolate the subtle faint fault signals, giving your team time to act before a costly shutdown.
- AI diagnostics and root cause on machines running as slow as 1 RPM with explanations of a fault, its likely cause, and recommended repairs so your team can prepare the right parts and work plan.
- Built for harsh conditions. A hermetically sealed, 316L stainless steel housing protects the sensor from water ingress in wet operating environments.
- Fewer trips to hard-to-access equipment. Remote monitoring collects machine health data without requiring your team to visit the machine for each reading.
Halo™ Hub 1.0 connects up to four sensors, so you can monitor multiple points on a large machine with less hardware to install and maintain. It sends readings to Augury over Wi-Fi or cellular.
Pairs with: Ultra Low RPM
Safety-certified coverage where it counts most.
Built for: Rotating assets in classified areas in environments with explosive or flammable atmospheres.
The same AI-powered diagnostics you use on standard assets, now extended into classified zones, so you manage hazardous and non-hazardous equipment from one view.
- Broad hazardous certifications: Class I & II, Div 1 & 2, ATEX, IECEx, CSA, and Zone 0 approvals
- Wireless, no conduit. Extends coverage without the cost and permitting of explosion-proof wired systems
- Long-range connectivity. ISA100.11a wireless up to 150 m line of sight
- Rugged by design. IP67 hermetically sealed stainless steel casing, 60 G peak dynamic range
- Field-replaceable D-cell battery lasting 3 to 5 years
Sensors install during normal operations. Each Cordant™ Edge Gateway supports up to 40 sensors and needs a 24V DC supply installed by a certified electrician before the Augury install visit. Augury can provide the power supply, or you can source it independently.
Pairs with: Hazardous
You know your assets.
Match each one to the right sensor.
Every asset runs at its own speed, in its own environment. Compare the three sensor families at a glance and see which fits each part of your operation.
- Best for
- Production and supporting equipment, including motors, pumps, fans, compressors, gearboxes
- Sensing
- Triaxial vibration, temperature, magnetic flux
- Vibration dynamic range
- ±60 g
- Frequency / speed
- ±3 dB @ 6.3 kHz (0–13 kHz)
- Connectivity
- Bluetooth Low Energy (BLE 2400–2480 MHz) via Cassia X2000
- Gateway
- Cassia X2000: up to 64 sensors
- Sealing / IP
- IP66/68/69 (Non-HZ) · IP64 (HZ)
- Hazardous approvals
- Non-hazardous zones
- Battery/Power
- Field-replaceable, up to 5 years (multi-manufacturer)
- Dimensions
- 60 mm × 52 mm · 176 g
- Best for
- Large gearboxes, rotary drums, kilns, and other slow-moving critical equipment
- Sensing
- Ultrasonic sensing
- Vibration dynamic range
- ±80 g peak
- Frequency / speed
- Up to 100 kHz sampling; faults down to 1 RPM
- Connectivity
- Wired to Halo Hub 1.0 (Wi-Fi + LTE Cat. 1); hub connects over Wi-Fi or cellular
- Gateway
- Halo™ Hub 1.0: 4 channels, simultaneous
- Sealing / IP
- Welded / hermetic · submersible to 60 m
- Hazardous approvals
- SIL 2 rated
- Battery/Power
- Line-powered hub, requires 85–264 VAC
- Dimensions
- 316L stainless, 1/4-28 UNF mount
- Best for
- Equipment in hazardous-classified environments and high-vibration applications
- Sensing
- Triaxial vibration, temperature
- Vibration dynamic range
- ±60 g peak
- Frequency / speed
- 2.4 Hz–8 kHz (X,Y,Z)
- Connectivity
- ISA100.11a wireless; up to 150 m sensor-to-gateway range under line-of-sight conditions
- Gateway
- Cordant™ Edge Gateway: up to 40 sensors
- Sealing / IP
- IP67 hermetically-sealed stainless steel
- Hazardous approvals
- Class I Zone 0 · ATEX · IECEx · CSA Div 1
- Battery/Power
- Field-replaceable D-cell, 3–5 years
- Dimensions
- 88 mm × Ø40 mm · 300 g (with battery)
What makes Augury’s IoT different
Hardware is a part of what matters. Augury’s capabilities span the sensor network and turn raw signals into diagnostics your team, or agents when implemented, can act on across your fleet of assets.
Smart IoT & endpoint roaming
Compatible sensors automatically connect to the strongest available signal as network conditions change, helping keep data flowing for reliable coverage without adding work for your team.
Edge gateways
Augury’s diagnostics account for changes in machine speed, load, and operation, helping distinguish developing faults from normal operating changes.
Sensor fusion & phase analysis
Combined vibration, temperature, and magnetic measurements provide a fuller picture of machine behavior. On supported sensors, synchronized readings enable phase analysis to help distinguish faults with similar symptoms, such as imbalance, misalignment, and looseness, so your team can plan the right repair.
Scale coverage without multiplying infrastructure
Connect multiple sensors through one gateway or hub, reducing the hardware your team needs to install and maintain. Each collects machine data and sends it to Augury for diagnostics.
Cassia X2000- Pairs with
- Halo R4000
- Key specs
- Connects up to 64 sensors · Bluetooth · wireless install
Halo™ Hub 1.0- Pairs with
- Halo U2000
- Key specs
- Collects readings from four sensors simultaneously, with sampling up to 100 kHz per sensor. Connects over Wi-Fi or cellular.
- Download the technical specs
- Download
Cordant™ Edge Gateway- Pairs with
- Ranger Pro Gen6
- Key specs
- Connects up to 40 sensors · ISA100.11a · Class I Zone 2 / ATEX approvals
- Download the technical specs
- Download
Cassia X2000 Halo™ Hub 1.0 Cordant™ Edge GatewayFAQs
-
Sensors measure machine condition, and a gateway or hub sends the readings to software for analysis. The right setup depends on the equipment. A pump, a slow-moving kiln, and a machine in a hazardous area may need different sensors and installation arrangements.
-
Start with the machine’s speed, operating conditions, and the faults you need to detect. Then check requirements such as temperature limits, washdown protection, hazardous-area approvals, and mounting. Augury helps assess these requirements and select suitable hardware.
-
No. Sensors can collect readings at scheduled intervals and still provide ongoing monitoring. Halo™ R4000 takes hourly readings; other systems use different recording schedules and durations. Augury analyzes the data for developing faults and delivers diagnoses and recommended actions when problems are identified.
-
A gateway collects data from multiple sensors and sends it to Augury for analysis. This lets several sensors share one connection to the platform. Each sensor family uses a compatible gateway or hub, with capacity and connectivity options suited to the application.
-
Yes. Augury integrates with CMMS and EAM systems so machine diagnoses and recommended actions can inform work orders and repair planning. The information transferred and the steps automated depend on your integration and configuration.